Scratch-free dusting brush
Step 2
Self-cleaning
Compatible with Dyson Detect V15™, Dyson Detect Slim V12™,
Dyson V11™, Dyson Cyclone V10™, Dyson V8™, Dyson V7™
and Dyson Digital Slim™cordless vacuums.
Note: Don’t press the Scratch-free dusting brush too hard against surfaces.
The ultra-soft bristles should be the only part of the tool that contacts surfaces.
Step 1
Attach the Scratch-free dusting brush directly to your vacuum or to the
extension hose for delicate cleaning.
Note: Only use the self-cleaning function when the Scratch-free dusting brush
is attached directly to the vacuum.
Step 2
Step 3
Step 1
When you notice dust starting to build up on the bristles during or after use,
we recommend you use the built-in self-cleaning function.
With your vacuum switched on, lift the Cleaning cuff until you hear a click,
so it completely covers the bristles. Rotate it five times. This hygienically
cleans the dust from the bristles and sucks it into the bin.
After five rotations, move the cleaning cuff back down, until you hear a click.
Your bristles are now dust-free.
Switch on your vacuum with the extension hose, hold the vacuum
with one hand and the Scratch-free dusting brush with your other,
using a pencil-like grip.
x5
The Scratch-free dusting
brush, which has soft
dusting bristles at the top
and a solid base.
The Scratch-free
dusting brush has a
green arrow, pointing
upwards, just above the
area of the base that
attaches to the vacuum
or extension hose.
A section of the base,
has been moved up
to cover the bristles
completely.
The base of the attachment
is still covering the bristles,
twist base round 5 times
To Next Page
Loading...
Need help?
General
