Dyson Purifier Humidify+Cool User Manual

Assembling your machine
Use both hands to lift your machine out of the box, by its base.
Do not lift out by the loop amplifier.
Assemble your machine with the filters that are supplied.
Your machine comes with a HEPA+Carbon filter. If you
purchased the Dyson Purifier Humidify+Cool Formaldehyde™
your machine also comes with a permanent catalytic filter.
Push the HEPA+Carbon filter into the outer cover and position
on the base. Push firmly until both outer covers click into place.
SCONON-SCOSCONON-SCO
Scaled 81% for QSG to maintain minimum line weight
Original scale
clik
clik
clik
clik
clik
clik
MAX
clik
clik
clik
clik
clik
clik
MAX
Place the remote control on top of the machine with the buttons
facing down.
Plug in and switch on.
The purifying humidifying fan with the filter covers open showing a HEPA plus
carbon filter located in the filter covers and a catalytic filter. Arrows demonstrate
that the catalytic filter is fitted directly to the base of the machine and the filter
covers will need to be assembled onto the base of the machine.

Dyson Purifier Humidify+Cool Specifications

General

Package width	350 mm
Package height	1000 mm
Package weight	12120 g
Filter life (max)	12 month(s)
AC input voltage	240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	43.4 W
Display type	LCD
Product color	Silver, White
Housing material	Acrylonitrile butadiene styrene (ABS)
Airflow	43.5 l/s
Noise level	62.4 dB
Air purify rate	- m³/h
Number of speeds	10
Country of origin	Malaysia
Oscillation angle	90 °
Suitable for room area up to	- m²
Suitable for room volume up to	81 m³
Harmonized System (HS) code	8421392590

Weight and Dimensions

Depth	312 mm
Width	220 mm
Height	923 mm
Weight	8050 g