TABLE OF CONTENTS
05 Safety and General Information
06 Transmitter Parts
07 Collar Receiver Parts
08 Charging the Batteries
Turning Your E-Collar On/Off
--- 10
The LCD Display Features
--- 11
Button Functions
--- 12
Program Stimulation Buttons and Factory Default Setting---14
Maximum Durations for Stimulation, Vibration, Tone---15
I Mode and Lock/Unlock Stimulation Lever---16
Advanced Features---17
Paring/Synching Procedures---18
CHANGING THE INTENSITY LEVEL OF STIMULATION---19
INDICATOR LIGHT---20
TESTING YOUR E-COLLAR---21
RECEPTION---22
REPLACING THE CONTACT POINTS---24
CORRECTLY FITTING THE COLLAR---25
WARRANTY AND REGISTRATION---26
ACCESSORIES---27
SAFETY AND GENERAL INFORMATION
- The Pro Educator Education Collar complies with all National and
International Standards and Guidelines for human exposure to radio
frequency electromagnetic energy.
- Nearly all electronic devices are susceptible to electromagnetic interference
(EMI) if inadequately shielded or designed without precautions to EMI.
- Pro Educator transmitters manufactured by E-Collar Technologies, Inc.
comply with Article 15 of the FCC rules and operate under Part 95 of FCC
regulations.
- Frequency of operation is 27.095 MHz.
IMPORTANT NOTICE
- To avoid Electromagnetic Interference and/or compatibility conflicts, please
turn off your transmitter and collar receiver in any facility where posted
notices instruct you to do so. Never use your equipment in close proximity
of a Hospital or Health Care Facility or enter the facility without turning off
both units.
- An FCC license is not needed to operate Pro Educator transmitters. However,
any change or modification made to the transmitter, including the supplied
antenna, without the expressed written approval of E-Collar Technologies, Inc.
could void your authority to operate pursuant to FCC Rules and Regulations.
To Next Page
Loading...
Need help?
General
