To Next PageTo Next Page
Need help?Do you have a question about the E-flight Blade SR RTF Airframe and is the answer not in the manual?
General| Brand | E-flight |
|---|---|
| Model | Blade SR RTF Airframe |
| Category | Motorized Toy Car |
| Language | English |
Overview, safety guidelines, and manual usage instructions.
Package contents, pre-flight checks, and flight readiness steps.
Comprehensive safety instructions for handling and charging Li-Po batteries.
Detailed procedures for charging the helicopter's Li-Po battery pack.
Installing batteries, troubleshooting charging errors, and system setup.
Checking balance point and identifying transmitter controls.
Steps to verify all servos and controls respond correctly before flight.
Explains the function and default settings for transmitter dip switches.
Overview of the combined ESC, mixer, and control unit features.
Steps to initialize the gyro and adjust gain for tail stability.
Adjusting control sensitivity for different flying styles.
Explanation of normal and stunt flight modes.
Using the throttle hold switch for safety and motor control.
Explains the function of the optional 5th channel knob.
Steps for binding the transmitter and receiver and setting fail-safe.
Performing a range check for reliable radio communication.
Adjusting trims, servo mode, and installing training gear.
Explanation of how sticks control pitch, roll, and yaw.
Adjusting tail rotor mixing and main rotor blade tracking.
Adjusting flybar paddles for control response and vibration reduction.
Adjusting flybar weights and head dampening for cyclic response.
Recommended safety practices for model aircraft flying.
Procedures for taking off, hovering, and controlling the helicopter in flight.
Lists of available replacement and optional parts.
Detailed list of all components with reference numbers.
Details on warranty coverage, limitations, and claims process.
Regulatory compliance information for the European Union.
