35E-flite Apprentice Assembly Manual
6. Once all the control throws have been set, make sure
to slide the clevis retainers over the clevises to prevent
them from opening accidentally.
7. For your reference the nose wheel steering pushrod is
set up in the following holes: The fixed position hole on
the nose wheel steering arm and the outside hole on the
rudder servo arm.
Installing the Propeller
Required Parts
Fuselage assembly Propeller
Propeller nut Propeller washer
Spinner cone Spinner backplate
Required Tools
Adjustable wrench
Important: Before performing any maintainance to the
motor, make sure the battery has been unplugged and
removed from your model to prevent injury.
1. Slide the propeller on the propeller adapter.
To Next Page
Loading...
