E-FLITE Blade CP - Flight Modes: Normal and Idle Up

18
Normal and Idle Up Flight Modes
The 6-channel FM transmitter included with your Blade™ CP features servo reversing and CCPM mixing, as well as
an “idle up” flight mode switch. This switch allows the pilot to toggle between “normal” and “stunt” (aerobatic) flight
modes during flight.
With the switch toggled toward the rear of the transmitter, the Blade CP will be flying in “normal mode.” In this
flight mode, the throttle curve is linear from 0% to 100%, with a pitch range of 0 degrees to +10 degrees. (See
Page 20 for additional data and graphics relating to the throttle and pitch curves preset for your Blade CP.) This is
the preferred flight mode for general hovering and gentle forward flight.
Idle Up Switch