To Next PageTo Next Page
Need help?Do you have a question about the E-FLITE BLADE CX2 and is the answer not in the manual?
General| Type | Helicopter |
|---|---|
| Brand | E-flite |
| Model | Blade CX2 |
| Category | Toy |
| Power Source | Electric |
| Skill Level | Beginner |
| Channels | 4 |
| Kit/ARF/RTF | RTF |
| Rotor Type | Coaxial |
| Battery | 7.4V 800mAh LiPo |
| Transmitter | 2.4GHz |
| Recommended Age | 14 years and up |
Overview of the Blade CX2 helicopter and its features.
Details the exclusive remedy, transferability, and limitations of Horizon's warranty.
Outlines Horizon's liability limits and disclaims consequential damages.
Emphasizes operating the product safely and responsibly to prevent injury or damage.
Lists further warnings regarding radio interference and product handling.
States compliance with FCC rules and lists countries where certifications are recognized.
Presents the official safety guidelines from the Academy of Model Aeronautics.
Lists all items included in the Blade CX2 Ready-to-Fly package.
Provides essential checklists for preparing the helicopter for flight.
Details critical warnings and guidelines for handling Li-Po batteries and charging procedures.
Covers charging issues and installing transmitter batteries.
Explains common charge error indications and their solutions.
Guides the user on inserting AA batteries into the transmitter.
Instructs on battery installation and checking the center of gravity.
Instructs on how to secure the Li-Po battery pack into the helicopter.
Explains how to balance the helicopter for optimal flight control.
Details how to verify servo and control linkage functionality before flying.
Provides steps for attaching training gear for beginners.
Covers the 4-in-1 control unit overview, arming, and motor test.
Describes the functions of the integrated control unit and its components.
Guides on arming the unit and testing motor response before flight.
Explains the process of binding the transmitter to the receiver and setting fail-safe.
Explains how the transmitter sticks control the helicopter's movement.
Covers choosing a flying area and general flying procedures.
Advises on selecting a suitable environment for flying the helicopter.
Guides the user on basic flight, hovering, and trim adjustments.
Details adjustments for trimmer pots on the 4-in-1 control unit.
Explains how to adjust the proportional mix for nose drift.
Details how to adjust the gyro gain for tail stability.
Guides on adjusting upper main rotor blade tracking for smoother flight.
Describes the optional-use Channel 5 knob and its proportional control capabilities.
Covers main motor maintenance and installing an optional heat sink.
Lists replacement and optional parts for the helicopter.
Lists part numbers and descriptions for replacing damaged components.
Lists available optional parts for enhancement or customization.
Provides a detailed list of parts with reference numbers for the exploded view.
