E-FLITE Blade 400 3D User Manual

Specifications
Main Rotor Diameter ........................................................................................... 28.2 in (718mm)
Tail Rotor Diameter ................................................................................................ 5.3 in (135mm)
Height .................................................................................................................9.0 in (230mm)
Length ................................................................................................................ 25.6 in (650mm)
Weight without Battery ......................................................................... 18.0–18.5 oz (510–525 g)
Weight with Battery .............................................................................. 23.0–24.5 oz (650–695 g)
Motor ....................................................................... 420H brushless outrunner, 3800Kv (installed)
ESC ................................................................................................... 25-amp brushless (installed)
Battery ........................................................................ 3S 11.1V 1800–2200mAh Li-Po (required)
Charger ............................................................................... 3S 11.1V Li-Po Compatible (required)
Transmitter..................... 6+ channel with helicopter and 120-degree CCPM programming (required)
Receiver ............................................................................................. 6+ channel micro (required)
Servos ..................................................................................DS75H Digital Sub-Micro (4 installed)
Gyro ..................................................................................... G110 Micro Heading Lock (installed)

E-FLITE Blade 400 3D Specifications

General

Type	Helicopter
Brand	E-Flite
Model	Blade 400 3D
Category	Toy
Kit/ARF/RTF	RTF
Main Blade Length	325mm
Power Source	Electric
Assembly Required	No
Motor	Brushless
Battery	11.1V 3S LiPo
Skill Level	Intermediate
Transmitter	6-Channel
Gyro	Included
Servos	Included

Summary

Introduction and Setup Essentials

Initial Requirements and Warnings

Covers needed items, recommendations, warnings, and warranty information for initial setup.

Safety, Support, and Disposal

Details safety precautions, customer support, and WEEE disposal instructions.

Receiver and Transmitter Configuration

Guides on connecting the receiver and setting up the transmitter for operation.

System Configuration and Checks

Control and Servo System Testing

Guides through control tests and servo arm/linkage adjustments for proper function.

ESC and Gyro Setup Procedures

Details ESC features, arming, motor control, and gyro initialization/modes.

Flight Operations and Maintenance

Understanding Flight Controls and Modes

Explains primary flight controls, flight modes, and throttle hold functions.

Pre-Flight, Flying, and Tuning

Covers first flight preparations, flying techniques, and blade/head adjustments.

Maintenance and Parts Information

Details routine maintenance, parts lists, and exploded views for repairs.