Need help?Do you have a question about the E-FLITE Blade SR and is the answer not in the manual?
General| Weight | 9.6 oz (272g) |
|---|---|
| Battery | 11.1V 1000mAh 3S Li-Po |
| Main Rotor Diameter | 22.2 in (565mm) |
| Kit/ARF/RTF | RTF |
| Channels | 4 |
| Type | Electric Helicopter |
| Radio | 2.4GHz DSM2 |
Essential safety guidelines and warnings for operating the model.
Critical warnings and guidelines for safe battery handling and charging.
Overview of the Blade SR, its specs, and RTF package contents.
Step-by-step guide for preparing the helicopter before its first flight.
A pre-flight checklist to ensure readiness for flying.
Detailed instructions for safely charging the flight battery.
Understanding charger LED indicators and error codes.
How to install AA batteries into the transmitter.
Securing the Li-Po flight battery to the helicopter.
How to check and adjust the helicopter's center of gravity.
Identifying the functions of each control on the transmitter.
Testing all helicopter controls for proper response and movement.
Procedures for arming the 2-in-1 control unit for flight.
Setting up the gyro and testing its response to yaw inputs.
Adjusting flight modes and control sensitivity using dual rates.
Adjusting gyro gain for optimal tail stability.
Making fine adjustments to trims for stable hovering.
Configuring the gyro's servo mode for proper operation.
Understanding and switching between flight modes.
Using the throttle hold switch for safety and motor control.
Selecting a safe and suitable location for flying.
Basic instructions for hovering and flying the helicopter.
Adjusting tail rotor mixing for torque compensation.
Ensuring main rotor blades track correctly to prevent vibration.
Aligning flybar paddles for proper control response.
Fine-tuning cyclic response with flybar weights and head dampening.
Using the optional channel 5 knob for auxiliary functions.
Binding the radio system and performing radio range checks.
Adhering to safety guidelines for model aircraft operation.
Details on warranty, repairs, FCC, EU compliance, and disposal.
To Next Page