21E-flite F-15 Eagle ARF Assembly Manual
Note: Some early kits may need to have the retract units
changed for this application. Please check your retract
units with the pictures. The actuation arm should exit the
same side as the gear strut wire when retracted. If so,
skip to Step 8 on the following page of this manual.
6. Remove the three screws that hold the main gear
retract together.
7. Carefully remove the actuator arm and move it so the
actuator is on the same side as the gear strut. Install the
screws and check that the retract moves smoothly without
any binding.
To Next Page
Loading...
