e-Ink Spectra 3100 User Manual

13
3 Software Guide
(1) Demo Kit Connection
 Open Flash_Burner.exe
 If connection is correct, the COM port number will show up.
 Select the COM port and press "connect"
 If connection is incorrect, the COM port will show COM1~COM6 (Please check driver for the
EVK)
(2) Update Initial Data
 Select "Initial Data"
 Press "Load file" to select an Initial file (.eink) that you want to use for the EPD.
 Press "Write data" to update Initial file into the kit

e-Ink Spectra 3100 Specifications

General

Brand	e-Ink
Model	Spectra 3100
Category	Monitor
Language	English