NO. PARA NAME QUANTITY
1 Rotor Head Set 1
2 Horizontal Axis Group 2
3 Rotor Clip Set 1
4 Paddle Group 2
5 Link Group 1
6 Swash Plate Group 1
7 Lower Link Group 2
8 Rudder Unit 1
9 Spindle Group 2
10 Servo Pressure Plate Group 1
11 Main Motor Unit 2
12 Bearing Set 1
13 Main Rack Group 1
14 Big Gear Set 1
15 Flight Control Motherboard 2
16 Governor Group 1
17 Landing Gear Group 2
18 Chassis Group 1
19 Tailstock Group 1
20 Tail Motor Unit 2
21 Chassis Group 1
22 Rear Wing 1
23 Screw Set 1
24 Battery 1
25
USB Charger Set
1
26 the transmitter Unit 1
Notice for beginners:
1. Please fly you models with guidance in the first time.
2. Before fly the models, you need to understand all the function of the transmitter and reaction cause by the rockers.
3. Don’t use 3D mode hurried. Practice flying and hovering flight under 6G mode until you are familiar with it. Then you can practice flying and hovering flight under 3D mode. When you
are familiar with these two modes you can practice! inverted flight with guidance.
4. Practice hovering flight of inverted flight to lay a foundation for making more brilliant flying.
5. This model is not a toy. To avoid damage, please take a simulated flight through computer before 3D flying.
ACCESSORIES LIST
To Next Page
Loading...
Need help?
General
