EasyManua.ls Logo

Eachine EV300D New 5.8G FPV Goggles - Troubleshooting and Upgrading; Troubleshooting Common Issues; Firmware Upgrading

Eachine EV300D New 5.8G FPV Goggles
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Trouble Shooting
No image, display is completely dark
No power supplied. Check power connections.
No image, display is grey
If using wireless module, ensure RX is working.
If using AV in cable, check video source.
Ensure TX is on and camera connections solid
Ensure lens cap is removed from camera
Complete white screen
LCD driver has failed and needs to be replaced under warranty. Contact your retailer. Short range
Ensure 5.8Ghz antenna were installed.
Upgrading
•TF card upgrading(TF card max 32G)
1. Format the TF card and load in the upgrading file SD_ CarDV.bin into TF card root directory, insert the TF card into
the goggles then power it on,
the goggles will get into automatic upgrading status and keep beeping, the upgrading will end up with a long
alarming. Taking the TF card out to check if the upgrading file SD_CarDV.bin is still there, if not, the upgrading is
success, then power it off and restart ; If file is still there, please retry.
2. For upgrading failure(wrong processing, TF card took out, goggles powered off), imperative upgrading operation is
necessary.
a. Power off the goggles, format the TF card and load in the imperative upgrading file SdFwCode.bin and upgrading
file SD_CarDV.bin.
b. Insert the TF card into the goggles then long press and hold DVR button vertically and plug battery, then press
the power button to turn on the goggles, release the DVR button when it start beeping, and the pgrading begin,
the process will end up with a long alarming. Formating the TF card and power off the goggles and restart.
• IC (Zbit32) upgrading operation
1. Load the USB device into the upgrade file MERGE.BIN and insert it into the micro usb interface of the goggles.
Press the mode button towards left to enter menu, select software Update (USB) in Option sub-menu, and short
press to confirm Upgrade, Restart EV300D until progress bar complete. (Note: please do not power off during
upgrading process)
2. Please refer to IC upgrade manual. (TF card must be taken out)
Read More About This Manual & Download PDF:
Eachine EC300D New 5.8G FPV Goggles User Manual – Download [optimized]
Eachine EC300D New 5.8G FPV Goggles User Manual – Download

Related product manuals