Eaglemaster E5 User Manual

IMPORTANT:
Please read the entire manual for complete details on the features, accessories and
operation before attempting to use your security system.
This Security system must be installed by a qualified technician to ensure proper
operation. Do not attempt to install or modify this system yourself as
this way void your warranty.
2-WAY CAR ALARM SYSTEM
Instruction manual

Eaglemaster E5 Specifications

General

Door Trigger	Yes
Hood Trigger	Yes
Trunk Trigger	Yes
Starter Kill	Yes
Panic Mode	Yes
Valet Mode	Yes
Compatibility	Universal
Remote Control Range	1000 meters
Power Output	12V

Summary

System maintenance

Programming 2-way remote

2-way signal paging features

STANDARD FEATURES:

To ARM the system

Step-by-step guide on how to arm the car security system.

To DISARM the system

Instructions for disarming the car security system.

Disarm without siren chirp

Panic mode

How to activate the panic alarm function for personal safety.

Valet mode

How to enter and exit Valet mode for service or parking.

Passive immobilizer (programmable)

System disables the engine starter after a period of inactivity.

Defective Zone Bypass & Alert

How the system bypasses active zones during arming and provides alerts.

Intrusion Alert

How the system alerts the user about triggered zones using chirps and flashes.

Silent arm mode

Dual stage shock sensor

Explanation of how the dual-stage shock sensor detects impacts.

Ignition controlled door lock/unlock(programmable)

Arming without Remote control

Auto Reset

System behavior after a violation, including automatic reset.

2-way LCD Intrusion Alert

LCD remote indications for different types of intrusion alerts.

Automatic REARM (programmable)

Remote sensor by pass

Disarm without Remote control

Arm without siren chirp

Method to arm the system silently without siren chirps.

Passive arm (programmable)

Emergency disarm (Valet SW & PIN code):

Emergency disarm by Valet Switch

Steps to disarm the system using the valet switch.

Emergency disarm by PIN code

Procedure to disarm the system by entering a PIN code.

Anti Car-Jacking mode:

Remote activates

Door switch activates

Set your own PIN code

Transmitter programming:

Programme mode features:

System Installation:

Mounting the Control Unit

Guidelines for selecting a suitable mounting location for the control unit.

Mounting the Shock Sensor

Recommendations for mounting the shock sensor for optimal performance.

WIRING DIAGRAM

20 PIN MAIN PORT WIRING DIAGRAM

Central door lock wiring:

For Factory installed central door lock system

Directly connect to 2 wire Actuator

A built-in Central door lock with electric lock switch(like: CHRYSLER..)

For vacuum type central door lock system (like : Mercedes Benz, AUDI..)