Install Accessories:
1. Install the rubber top door seal (picture A) to the top of the Door.
2. Install the side Rubber seal (picture B) to the left side of the moveable door.
3. Install the bottom rubber seal (picture C) to the bottom of the door.
4. Install the 2 Pcs magnetic strips to the right side of the door and the left side of the No.4 fixed clear panel.
5. Install the hand shower pole: First Use an allen wrench to remove the socket from the pole and mount the bracket to the back panel with 4x16mm
screws, 4mm plastic washer, 6mm plastic washer and 4mm nuts. Illustrated in Drawing E. Then mount the pole to the brackets once installed to glass
panel.
6. Connect the hand shower hose to the hand shower wand. Illustrated in Drawing F.
7. Install the glass shelf: Use a philips screwdriver to fasten the metal bracket to the back panel with 4x16mm Screws, 4mm Plastic washers,6mm
plastic washer and 4mm nuts, Illustrated in drawing G. Then put the glass shelf onto the metal arms and use a philips screwdriver to fasten them
securely.
hand shower
Hose
Wall connector for
hand shower
4mm rubber washer
Hand Shower
Pole
4mm rubber washer
Clear Side
fixed panel
To Next Page
Loading...
