EasyManua.ls Logo

EAPRO TRON 1050VA - Personal Precautions; Battery Handling Precautions; Electrical Shock Hazard; Electrical Shock Safety Statements

EAPRO TRON 1050VA
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FIRE AND BURN HAZARD
DANGER
Statement of Hazards: Consists of avoidance or Strict Compliance
statements. Serious harm or death will result from failing to follow these
directions.
Note: Please take note that turning off the MPPT Solar PCU with the on/off
switch on the front panel will not reduce the risk of electrical shock.
Do not install the MPPT Solar PCU in a zero clearance compartment or do not
cover the air intake vent opening in any other way.
To avoid overheating, do not use any external-battery charger with the MPPT
Solar PCU.
EXPLOSION HAZARD
Charge only TUBULAR/SMF rechargeable batteries that are correctly rated
(such as 12V), as other battery types may explode and burst.
•Avoid working close to lead-acid batteries. When batteries are operating
normally, explosive gases are produced.
Avoid installing and using the equipment in areas that are not ignition-
protected or compartments containing flammable materials.
3
PERSONAL PRECAUTIONS :