EasyManua.ls Logo

Earlex Spray Station HV2900 - User Manual

Earlex Spray Station HV2900
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATING INSTRUCTION MANUAL
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
MANUALE DI ISTRUZIONI OPERATIVE
EARLEX SPRAY STATION
PL
NL
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUÇÕES DE UTILIZAÇÃO
INSTRUKCJA OBSŁUGI
GEBRUIKSHANDLEIDING
HV2900
HV3900 HV5900
HV3500
®

Table of Contents

Other manuals for Earlex Spray Station HV2900

Preview: Quick Start Guide
Quick Start Guide1 page

Questions and Answers

  • I
    ismithAug 3, 2025
    Why is my Earlex Paint Sprayer not spraying paint?
    • R
      rogerjeffersonAug 3, 2025
      If the Earlex Paint Sprayer isn't releasing paint, several factors could be at play. Ensure the paint isn't too thick; if it is, add thinner. Check for clogs in the Fluid Tip and Pick-Up Tube, cleaning them as necessary. Inspect the Air Hose for splits and replace if needed. Filter the paint to remove any graininess. Refill the Paint Container if it's low. Make sure the Pick-Up Tube is correctly positioned towards the paint, and inspect the air inlet for blockages, cleaning the filter if needed.
  • D
    Douglas ShahAug 14, 2025
    How to stop Earlex Spray Station HV2900 Paint Sprayer from dripping?
    • A
      Angela BakerAug 14, 2025
      If the paint from your Earlex Paint Sprayer is dripping, it could be due to several reasons. The paint might be too diluted, in which case you should add undiluted paint. Alternatively, the paint output may be too high; try reducing it by adjusting the Paint Flow Adjuster. You might also be moving too slowly, so increase your application speed. Releasing the trigger sooner can also help, as can increasing the distance between the spray gun and the workpiece.
  • A
    Alyssa GallegosAug 22, 2025
    What to do if Earlex Spray Station HV2900 Paint Sprayer is spraying thin?
    • A
      April PattersonAug 22, 2025
      If the paint from your Earlex Paint Sprayer appears too thin or irregular, several factors could be responsible. The paint might be too diluted, so try adding undiluted paint. Alternatively, the paint output could be too low; increase it by adjusting the Paint Flow Adjuster. You may also be moving too fast, so reduce your application speed. A clogged spray gun could also be the culprit, so clean it thoroughly. Finally, ensure the spray gun is not too far away from the workpiece; move it closer if necessary.

Summary

Before Use Safety Instructions

Exploded Parts View

Diagrams

Safety Operating Instructions

Technical Specification

Parts List Fig.1

Parts List HV3500 Fig.2

Parts List HV2900;3900;5900 Fig.3

Introduction

Preparation

Set Up

Spray Patterns

Explanation of the different spray patterns available for use with the spray gun.

Cleaning Instructions Spray Gun

Fluid Tip and Needle

Troubleshooting

Mains Connection

EC Declaration of Conformity

Design Registrations and Patents

Guarantee and Helpline

Earlex Spray Station HV2900 Specifications

General IconGeneral
Nozzle Size1.5 mm
TypeHVLP
Cup Capacity1 liter
Hose Length2.5 m
Cable Length3 meters

Related product manuals