EasyManua.ls Logo

Earlex SPRAY STATION 3500 - User Manual

Earlex SPRAY STATION 3500
62 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATING INSTRUCTION
MANUAL
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
MANUALE DI ISTRUZIONI
OPERATIVE
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUÇÕES DE
UTILIZAÇÃO
INSTRUKCJA OBSŁUGI
EARLEX SPRAY STATION 3500
RU
PL
UA
GR
DK
NL
TR
SE
ИНСТРУКЦИЯ ПО
ЭКСПЛУАТАЦИИ
ІНСТРУКЦІЇ З ЕКСПЛУАТАЦІЇ
ΕΓΧΕΙΡΙΔΙΟ ΟΔΗΓΙΩΝ
ΛΕΙΤΟΥΡΓΙΑΣ
BETJENINGSVEJLEDNING
GEBRUIKSHANDLEIDING
KULLANIM TALİMATI
KILAVUZU
BRUKSANVISNING
hv3500 08-09 A4:Layout 1 17/8/09 14:11 Page 1

Table of Contents

Questions and Answers

  • M
    Melissa HarveyAug 11, 2025
    Why is no paint being released from my Earlex Paint Sprayer?
    • L
      Laura JohnsonAug 11, 2025
      If no paint is being released from your Earlex Paint Sprayer, several factors could be at play. The paint might be too thick, in which case you should add thinner. A clogged Fluid Tip or Pick-up Tube could also be the culprit; clean these components. Inspect the air hose for splits and replace it if necessary. Grainy paint needs filtering. Ensure the Paint Container isn't empty and that the Pick-up Tube is correctly positioned towards the paint. Finally, check the air inlet for blockages and clean the filter if needed.
  • V
    vaughnryanAug 18, 2025
    How to stop the Earlex Paint Sprayer from dripping?
    • P
      Pamela BallardAug 18, 2025
      If the paint drips onto the item you're painting with your Earlex Paint Sprayer, it could be due to several reasons. The paint might be too diluted, so try adding undiluted paint. Alternatively, the paint output may be too high; reduce it by adjusting the Paint Flow Adjuster. You might be moving too slowly, so increase your application speed. Releasing the Spray Trigger sooner and increasing the distance between the Spray Gun and the work surface can also help.
  • J
    jessica17Aug 26, 2025
    What to do if the Earlex Paint Sprayer applies paint too thin?
    • G
      Gregory JacksonAug 26, 2025
      If the paint from your Earlex Paint Sprayer is too thin or irregular, it could be due to several reasons. The paint might be too diluted, so add undiluted paint. The paint output could be too low, so increase it by adjusting the Paint Flow Adjuster. You might be moving too fast, so reduce your application speed. A clogged Spray Gun needs cleaning. Also, make sure the Spray Gun is not too far away from the work surface.
  • V
    Vanessa JonesSep 2, 2025
    Why too much paint in one area with Earlex Paint Sprayer?
    • K
      Kristin SchmidtSep 3, 2025
      If you're applying too much paint in one area with your Earlex Paint Sprayer, it's likely because you are moving your wrist. Instead, move your forearm to maintain a more consistent and even application.

Earlex SPRAY STATION 3500 Specifications

General IconGeneral
TypeHVLP (High Volume Low Pressure)
Power650 W
Weight3.8 kg
Viscosity CupYes
Nozzle Size1.5 mm
Cable Length3.0 m

Related product manuals