EasyManua.ls Logo

Earlex Spray Station HV5500 - User Manual

Earlex Spray Station HV5500
22 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DO NOT RETURN TO STORE IF THIS PRODUCT HAS BEEN USED
If you have any questions relating to this product please contact
Earlex customer service
TOLL FREE: 888-783-2612
NE PAS RETOURNEZ LE PRODUIT AU MAGASIN SI CE DERNIER A
DÉJÀ ÉTÉ UTILISÉ.
Si vous avez des questions concernant ce
produit merci de contactez le service client d'Earlex au
888-783-2612
NO DEVUELVA EL PRODUCTO AL ESTABLECIMIENTO SI HA SIDO USADO.
En caso de dudas y preguntas relacionado con el
producto contacte con el servicio Earlex llamando al
TELÉFONO GRATUITO 888-783-2612
EARLEX SPRAY STATION HV5500
OPERATING INSTRUCTION MANUAL
BEFORE USE – PLEASE READ THE MAIN MANUAL AND SAFETY INSTRUCTIONS.
Please retain for future reference.
MODE D’EMPLOI
AVANT UTILISATION, MERCI DE LIRE ATTENTIVEMENT LE MODE D'EMPLOI ET LES
CONSIGNES DE SÉCURITÉ.
Veuillez conserver cette notice pour toute consultation future.
MANUAL DE INSTRUCCIONES
ANTES DE UTILIZARLA - POR FAVOR LEA EL MANUAL PRINCIPAL Y LAS
INSTRUCCIONES DE SEGURIDAD.
Guárdelo para futuras consultas.
L1325_5500_0311.qxd:Layout 2 7/3/11 17:00 Page 1

Table of Contents

Questions and Answers

  • T
    Tyler ByrdJul 27, 2025
    Why does paint run when using my Earlex Spray Station HV5500 Paint Sprayer?
    • R
      ronald61Jul 27, 2025
      Paint running on the sprayed item can occur due to several reasons. It might be because the paint is too diluted, so try adding undiluted material. Alternatively, the paint volume could be too high; reduce the paint flow by adjusting screw (12). Other factors include moving too slowly (increase application speed), holding the gun trigger for too long (release it earlier), or positioning the gun too close to the workpiece (increase the distance).
  • B
    Barry HarveyAug 6, 2025
    What to do if no paint is being produced by my Earlex Spray Station HV5500 Paint Sprayer?
    • J
      jacqueline55Aug 6, 2025
      If your Earlex Paint Sprayer isn't producing paint, several issues could be the cause. The paint might be too thick, so add thinner. The gun or pick-up tube could be clogged, so clean them. Also, check for a split in the air hose and replace if necessary. Grainy paint can also cause this, so filter the paint. Ensure the container isn't almost empty and refill it if needed. Make sure the gun isn't at an angle, ensure the pick-up tube is angled towards the paint. Finally, check that the air intake isn't blocked by paper or debris.
  • N
    ndavisAug 15, 2025
    How to fix thin or irregular paint from Earlex Spray Station HV5500?
    • K
      Kristin WellsAug 15, 2025
      If the paint appears thin or irregular when using your Earlex Paint Sprayer, this could be due to several reasons. The paint may be too diluted, so add undiluted material. The paint volume could be too low, so increase the paint flow by adjusting screw (12). You might also be moving too fast, so reduce your application speed. A clogged gun can also cause this issue, so clean the gun. Finally, the gun might be too far away from the workpiece, so reduce the distance.

Summary

Safety Operating Instructions

Fire and Explosion Hazards

Key warnings regarding fire and explosion risks during operation.

Electrical Safety and Usage Precautions

Guidelines for safe electrical connection and general usage to prevent injury.

User Responsibilities and Maintenance

Responsibilities for proper use, cleaning, and use of genuine replacement parts.

Important Electrical Information

Extension Cords

Recommendations for using extension cords with the spray station, including gauge.

Double Insulated Appliance

Explanation of the double insulated feature and plug safety.

Parts List

Optional Extras

Product Usage and Operation

Selecting Paint

Guidance on choosing suitable paints and coatings for the spray station.

Surface and Job Preparation

Instructions for preparing surfaces and masking areas before spraying.

Thinning Materials

Details on using the viscosity cup and thinning paints for optimal spraying.

Operating the Spray Station

Step-by-step guide on setting up and using the spray gun and motor unit.

Spray Patterns

Explanation of the different spray patterns and how to adjust them.

Spraying Techniques and Adjustments

Adjusting Paint Volume

How to adjust the paint volume using the adjusting screw for desired output.

Spraying Techniques

Best practices for spraying, including gun movement, angle, and distance.

Fluid Tips and Needles

Guidance on selecting appropriate fluid tips and needles for different materials.

Helpful Spraying Hints

Practical tips for achieving better results and avoiding common spraying issues.

Cleaning Instructions

Maintenance and Troubleshooting

Periodic Maintenance

Regular checks and adjustments for gland washers to ensure optimal performance.

Turbine Unit Care

Instructions for maintaining the turbine unit, including filter cleaning and storage.

Troubleshooting Common Issues

Solutions for problems like paint runs, irregular spray, or no paint production.

Servicing and Warranty Information

Servicing of Double-Insulated Appliances

Guidelines for servicing double-insulated appliances by qualified personnel.

Product Warranty Details

Information regarding the 24-month guarantee against faulty manufacture and materials.

Earlex Spray Station HV5500 Specifications

General IconGeneral
TypeHVLP (High Volume Low Pressure)
Power650 W
Weight3.5 kg
Nozzle Size1.5 mm
Sound Pressure Level75 dB

Related product manuals