Earlex SPRAY STATION - User Manual

Other manuals for Earlex SPRAY STATION

Quick Start2 pages

Questions and Answers

A
Alice GrahamJul 26, 2025
Why is my Earlex SPRAY STATION not spraying paint?
- D
  Deborah WellsJul 26, 2025
  If your Earlex Paint Sprayer isn't producing paint, several factors could be at play. The paint might be too thick, requiring the addition of thinner. The gun or pick-up pipe could be clogged, necessitating a thorough cleaning. A split air hose would need replacement. Grainy paint requires filtering. Ensure the container has enough paint, and the Paint Feed Tube is correctly angled. Also, verify that the air intake isn't blocked by debris.
S
Stacie MayoAug 5, 2025
How to stop my Earlex Paint Sprayer from dripping?
- D
  Derek FletcherAug 5, 2025
  Paint dripping from your Earlex Paint Sprayer usually means the paint is too diluted, so you should add undiluted material. It could also be that the paint volume is too high; reduce the paint flow using the Fluid Adjusting Screw. Moving too slowly or holding the spray gun trigger too long can also cause drips. Increase your application speed and release the trigger sooner. Finally, ensure you're not holding the spray gun too close to the workpiece; increase the distance.
L
Lisa AdamsAug 14, 2025
What to do if Earlex SPRAY STATION Paint Sprayer is spraying thin?
- W
  William McguireAug 14, 2025
  If the paint from your Earlex Paint Sprayer appears thin or irregular, it could be due to several reasons. The paint might be too diluted, in which case you should add undiluted material. Alternatively, the paint volume could be too low; increase the paint flow using the Fluid Adjusting Screw. Other potential causes include moving too fast, a clogged spray gun, or holding the spray gun too far away from the workpiece. Adjust your speed, clean the gun, or reduce the distance accordingly.