To Next Page
C
Cheyenne SpencerAug 1, 2025
What to do if spray material doesn't reach the Earlex 5900 gun when activated?
- DdanielorozcoAug 1, 2025
If the spray material isn't reaching the spray gun when you pull the trigger, here are a few things to check: * Ensure the air supply from the spray station is properly reaching the paint container. * Make sure the air feed hose and paint container lid are sealed correctly. * Inspect the spray gun fluid tip for blockages and confirm the fluid needle can move freely. * Verify the spray material's viscosity is less than 100 DIN/sec. * Check that the level of spray material in the paint container isn't too low.
General
