Need help?Do you have a question about the EarthQuaker Devices Spatial Delivery and is the answer not in the manual?
Toggles between upward sweep, downward sweep, or sample and hold modes.
Adjusts envelope sensitivity (Up/Down modes) or speed (Sample & Hold mode).
Crossfades between high, band, and low pass filters for tonal variety.
Filter feedback control that adds body and ring to the filter voice.
Six available preset slots to save and recall favorite settings, including expression jack assignments.
Detailed steps for saving new presets and recalling existing ones.
Guide to modifying existing presets and the process for overwriting them.
Tips for managing presets, including expression assignments and overwriting precautions.
Explains the two operating modes indicated by the Save/Recall switch LED color.
Instructions for assigning an expression pedal to control parameters like Range or Resonance.
Details the relay-based switching for momentary and latching footswitch operation.
Specifies the required power supply and current draw for the pedal.
Lists key technical details like input and output impedance.
Outlines the limited lifetime warranty and how to seek support.
General| Type | Envelope Filter |
|---|---|
| Bypass | True Bypass |
| Weight | 0.5 lbs |
| Input Impedance | 1 MΩ |
| Controls | Range, Resonance, Filter |
| Power Supply | 9V DC power supply |
| Output Impedance | 1kΩ |
To Next Page
