zones off
If the timer is set on one zone:
1. Touching the heating zone selection control
that you want to set the timer for.
2. Tou
ch timer con
trol , the “10” will show in the
timer display. and the “0” flashes.
3.
Set the time by touching the slider control. (e.g. 5)
4. Touch timer control again, the “1” will flash.
5. set the time by touching the slider control (e.g.9), now the timer you set is 95
minutes.
5. When the time is set, it
will begin to count down immediately. The display will
show the remaining time
b) Setting the timer to turn one or more cooking
To Next Page
Loading...
