There are ventilation holes around outside of the
hob. YOU MUST ensure these holes are not blocked
by the worktop when you put t
he hob
into position.
Be aware that the glue that join the plastic or wooden
material to the furniture, has to resist to temperature not
below 150℃, to avoid the unstuck of the paneling.
The rear wall, adjacent and surrounding surfaces must
therefore be able to withstand an temperature of 90℃.
9.2 Before installing t
he hob, make sure that
• The work surface is square and level, and no structural members interfere
with space requirements.
• The work surface is made of a heat-resistant and insulated material.
To Next Page
Loading...
