To Next PageTo Next Page
Need help?Do you have a question about the Eastron SDM120 Series and is the answer not in the manual?
General| Model | SDM120 Series |
|---|---|
| Category | Measuring Instruments |
| Display Type | LCD |
| Type | Single Phase Energy Meter |
| Frequency | 50/60Hz |
| Frequency Range | 50/60Hz |
| Communication | RS485 |
| Communication Protocol | Modbus-RTU |
| Impulse Output | Yes |
| Mounting | DIN rail |
| Standards | IEC 62053-21 |
| Starting Current | 0.02A |
| Accuracy Class | Class 1 |
| Storage Temperature | -40°C to +70°C |
Highlights potential dangers from failure to follow instructions, including risk of death, serious injury, or material damage.
Specifies that only authorized personnel should operate the equipment according to safety and regulatory standards.
Details proper usage, transport, storage, installation, and handling to prevent damage and ensure reliable operation.
Thanks the user for purchasing the SDM120 series energy meter and highlights its suitability for sub-metering.
Lists operating humidity, temperature ranges, international standards, accuracy class, and protection ratings.
Details meter types, voltage, insulation capabilities, current ratings, power consumption, and output rates.
Outlines the accuracy error percentages for different current loads and power factors.
Provides physical dimensions and lists materials used for the case, protection cover, and clamp.
Emphasizes safety during installation, including turning off power and using insulating tools.
Covers wiring recommendations, switch/breaker installation, mounting, and environmental considerations.
Explains the consumption indication LED, meter reading display for different models, and pulse output usage.
