To Next PageTo Next Page
Need help?Do you have a question about the Eastron SDM72D-M and is the answer not in the manual?
General| Model | SDM72D-M |
|---|---|
| Category | Measuring Instruments |
| Display | LCD |
| Base Current | 5A |
| Maximum Current | 100A |
| Current Rating | 100A |
| Frequency | 50/60Hz |
| Accuracy | ±1% |
| Impulse Voltage | 6kV |
| Operating Temperature | -25°C to +55°C |
| Storage Temperature | -40°C to +70°C |
| Mounting | DIN Rail |
| Voltage Measurement Range | 176V - 276V |
| Rated Voltage | 230V AC |
| Voltage Range | 176 ~ 276V AC (L-N) |
| Current Measurement Range | 0.25 - 100A |
| Power Consumption | <2VA |
| Frequency Measurement Range | 45-65Hz |
| Communication | RS485 Modbus RTU |
| Relative Humidity | ≤95% (non-condensing) |
| Weight | 0.3kg |
| Accuracy Class | Class 1 |
Details on voltage, current, power consumption, frequency, and withstand ratings for the energy meter.
Details how to enter Set-up mode, including password confirmation and default password.
Step-by-step guide to configuring Modbus address, Baud rate, and Parity settings.
Details the Modbus input registers for reading electrical quantities like power and energy values.
Explains Modbus holding registers for managing instrument configuration settings.
Covers parameters like Parity/Stop, Modbus Address, and Password configuration via Modbus.
