To Next PageTo Next Page
Need help?Do you have a question about the Eastron SDM530C and is the answer not in the manual?
General| Base Current (Ib) | 5A |
|---|---|
| Maximum Current (Imax) | 100A |
| Starting Current (Ist) | 0.4% Ib |
| Impulse Voltage | 6kV |
| AC Voltage | 2kV |
| Frequency | 50/60Hz |
| Mounting | Din rail |
| Display | LCD |
| Rated Voltage (Un) | 3x230/400V AC |
| Accuracy Class | 1.0 |
| Operating Temperature | -25°C ~ +55°C |
| Storage Temperature | -40°C to +70°C |
| Frequency Range | 45Hz ~ 65Hz |
| Communication | RS485 |
| Measurement Type | Active energy |
Enter password into the Settings screen; default is 1000.
Default: 1000imp/kWh. Optional: 1000, 100, 10, 1.
Default: 100ms. Optional: 200, 100, 60.
Default: P (Total active energy). Optional.
Default: 60 min. Range: 0-60min, 0 means real-time update.
Default: 0s. Rotation time range: 0~30s.
Default: 60 min. Options: off, on, 5, 10, 20, 30, 60, 120.
Setting range: 0~255ms. Default 100ms.
DevEui and AppEui identifiers for OTAA join.
Dev address and network keys for ABP join.
Indicates meter connection status to the gateway.
Enables automatic command sending to gateway for status check.
Sets the interval for sending commands to the gateway.
Set or change the user password for device access.
Check alarm associated information like Voltage, Current, Power.
Configure alarm object and value, typically via communication.
Control relay status (open/close) for alarm events.
Physical dimensions of the SDM530-LR meter.
Recommended wiring torque for terminals.
Details on terminal types and wire sizes for connection.
Wiring diagram for three-phase, four-wire systems.
Wiring diagram for single-phase, two-wire systems.
