To Next PageTo Next Page
Need help?Do you have a question about the Eastron SDM630M CT and is the answer not in the manual?
General| Brand | Eastron |
|---|---|
| Model | SDM630M CT |
| Category | Measuring Instruments |
| Language | English |
Displays phase-to-neutral voltage readings for 3p4w and 3p3w systems.
Shows the current readings for each individual phase.
Displays overall system frequency and total power factor.
Indicates the highest recorded active power demand since the last reset.
Shows the highest recorded current demand since the last reset.
Displays instantaneous active power in kilowatts (kW) for each phase.
Displays instantaneous reactive power in kilovolt-amperes reactive (kVAr) for each phase.
Displays instantaneous apparent power in kilovolt-amperes (kVA) for each phase.
Shows the total accumulated active power (kW), reactive energy (kVArh), and apparent power (kVA).
Lists all measurable electrical quantities (V, I, PF, Freq, Demand, Energy) and their ranges.
Details voltage and current input requirements and connection types (1p2w, 3p3w, 3p4w).
Outlines accuracy levels for various measurements and response times.
Details RS485 Modbus RTU configuration parameters like baud rate, parity, and stop bits.
Wiring diagram and instructions for installing the unit in a 3-phase, 3-wire system.
Wiring diagram and instructions for installing the unit in a 3-phase, 4-wire system.
Wiring diagram and instructions for installing the unit in a single-phase, 2-wire system.
