To Next PageTo Next Page
Need help?Do you have a question about the Eastron SDM630-Modbus MID V2 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Communication | Modbus RTU |
| MID Approval | Yes |
| Frequency | 50/60 Hz |
| DIN Rail Mounting | Yes |
| Operating Temperature | -25°C to +55°C |
| Storage Temperature | -40°C to +70°C |
| Weight | Approx. 400g |
| Current Measurement | Direct Connection |
| Dimensions | 100mm x 72mm x 76mm |
Explains general navigation and selection methods within the meter's set-up menu.
Details the process for entering numerical values like passwords and settings.
Configures pulse output 1 for energy measurement pulses, including rate and duration.
Sets the integration period for current and power readings for demand measurement.
Configures RS485 network address, baud rate, parity, and stop bits for Modbus RTU.
Illustrates wiring configurations for three-phase and single-phase systems.
Lists electrical parameters, measurement ranges, and accuracy specifications.
Provides environmental operating conditions and physical dimensions of the meter.
Overview of Modbus RTU communication, message formats, and serial transmission.
Explains input/holding registers, commands, and data representation like IEEE floating point.
Details Modbus exception codes, responses, and diagnostic functions.
