Need help?Do you have a question about the Eastsign BU-1600WL and is the answer not in the manual?
Controls the heating function and indicator lamp for the drying oven.
Activates the cooler and allows speed adjustment via potentiometer.
Controls the rotation direction (clockwise/counter-clockwise) of the collecting roller.
Manages the operation state (ON/OFF) of the collecting roller motor.
Adjusts the speed of the collecting roller by rotating clockwise or counter-clockwise.
Controls the operation of the liquid pump, with an indicator lamp.
Turns the main power supply of the machine ON or OFF.
Manages temperature settings and display (SV/PV) for laminating.
Steps before starting the laminating process, including adding liquid and setting temperature.
Procedure for adding filtered liquid to the machine's tank.
Guidance on setting the appropriate temperature for liquid film drying.
Detailed steps for positioning and feeding the picture into the laminator.
Attaching leading paper/cloth to the picture ends and winding onto a tube.
Adjusting roller systems and positioning wheels for liquid film wiping.
Securing liquid-film stoppers with handwheels at the picture ends.
Adjusting the damp-handwheel for proper picture tension and drying.
Setting the collecting roller direction and speed for staining the picture.
Process of taking the laminated picture off the machine after completion.
How to use the emergency button to stop the machine in case of overheating or issues.
Action to take if machine malfunctions are detected.
Post-operation procedures including power off, liquid retrieval, and cleaning.
Procedure to disconnect the machine from the power source.
Collecting any residual liquid from the machine's tray.
Cleaning key components like wiping rods and rollers after use.
Steps to pre-heat the drying oven to the required temperature before laminating.
Step-by-step guide for the actual liquid laminating operation.
Initiating liquid pump, opening valve, and spreading liquid onto the picture.
Setting roller direction, speed, and adjusting temperature for optimal lamination.
Steps to stop heating, clean glue, and turn off the drying box switch.
Ensuring proper connection of the power supply and earth wire.
Understanding the function of the emergency switch and its impact on power supply.
Caution regarding avoiding hand injuries when lifting parts like wiping rods and drying ovens.
Importance of straight and flat alignment of leading paper on the collecting roller.
Ensuring correct laminating speed for adequate liquid film drying.
Necessity of cleaning retained liquid from wiping rods and frames promptly.
Precautions for the high-power drying oven, including prohibited substances and fire safety.
Noting that the cooler continues to work for 2 minutes after the machine stops.
Promptly checking for abnormal sounds or failures and not operating before fixing.
Regular checks of rotating components and occasional lubrication.
Turning off power supply before performing checks or repairs.
Reaching out to the manufacturer for unresolved troubles or failures.
Statement that the machinery is manufactured and assembled per applicable regulations.
Details on the 15-month warranty period, excluding specific parts.
Eastsign's commitment to repair/replace parts, buyer responsible for shipping.
Buyer's right to remedy defects in urgent safety cases with Eastsign reimbursement.
Requirement for written notification within 10 days of discovery for warranty claims.
Charges for parts and shipping if the machine is not under warranty.
Buyer's responsibility for travel and accommodation costs for onsite services.
Information on registering the machine via the Eastsign website.
Eastsign not liable for damages from unauthorized repairs without prior approval.
List of conditions and factors that void the warranty (wear, misuse, etc.).
Warranty void if unauthorized equipment is installed or machine is modified.
To Next Page
General