Need help?Do you have a question about the Eastwood TIG 200 LCD and is the answer not in the manual?
General| Brand | Eastwood |
|---|---|
| Model | TIG 200 LCD |
| Category | Welding System |
| Language | English |
Solutions for problems related to arc starting, wandering, and heat concentration.
Covers issues with arc wandering and difficulty concentrating heat in a specific area.
Explains causes and corrections for porosity appearing in the weld bead.
Details how contamination affects the weld bead and methods to prevent it.
Provides solutions for problems related to tungsten melting during welding.
Solutions for low amperage or incorrect A/C balance affecting aluminum penetration.
Solutions for low amperage affecting steel penetration.
Addresses issues arising from the tungsten contacting the base metal during welding.
Discusses how positioning and shielding affect weld appearance.
Explains how to prevent craters at the end of the weld bead.
Identifies factors leading to weld bead cracking and how to avoid them.
Provides methods to reduce heat and prevent material warping during welding.
To Next Page