DVR AND NETWORK SETUP
9
3. DVR AND NETWORK SETUP
3.1 DVR Setup
For detailed DVR & Network setup, please refer to 4CH DVR CD Manual supplied within the sales package. You can use
the following buttons for DVR setting:
ITEM FUNCTION
MENU
Enter / exit the quick start menu
Under the sub-layer of the advanced setting menu, use this button to confirm the
settings and go back to the upper layer.
▲ ▼ Make the selection / Change the setting
◄ ► Go to the upper layer or sub-layer / Make the selection
ENTER
Confirm the password entering
Go to the sub-layer of the advanced menu
t NEXT Move the cursor to this item and press the “ENTER” button to go the next page.
s BACK Move the cursor to this item and press “ENTER” button to go the previous page.
3.1.1 NTSC / PAL System Switch
The DVR will automatically detect and switch to the PAL or NTSC system depending on the country or area it is located,
so basically you don’t need to switch the DVR system manually.
3.1.2 Date and Time Setting
Before operating your DVR, please set the date and time on your DVR first.
Press the “MENU” button and enter the password to go to the menu list. The default admin password is 0000. Move the
cursor to “DATE” and you can set the date / time / daylight saving in the “DATE” menu list.
NOTE: Please DO NOT change the date or time of your DVR after the recording function is activated. Otherwise, the
recorded data will be disordered and you will not be able to find the recorded data to backup by time search. If
users change the date or time accidentally when the recording function is activated, it’s recommended to clear all
HDD data, and start recording again.
3.1.3 DVR Password Setting
Press the “MENU” button and enter the password to go to the menu list. Then, move the cursor to “ADVANCE” to enter the
advanced setting menu.
In the “ADVANCE” menu, move the cursor to “SYSTEM”. Select “PASSWORD” and press the “ENTER” button to enter the
submenu to set the password (four digits). The default admin password is 0000.
ADVANCE SYSTEM
CAMERA SERIAL TYPE RS485
DETECTION BAUDRATE 2400
REMOTE HOST ID 0
DISPLAY
PASSWORD XXXX
ALERT RESET DEFAULT RESET
SYSTEM
CLEAR HDD HDD-MASTER-1
NETWORK UPGRADE START
BACKUP AUTO KEYLOCK NEVER
HDD INFO LANGUAGE ENGLISH
VIDEO FORMAT NTSC
VERSION 1160-1012-1021-1014-M3-6C1B
To Next Page
Loading...