Maintenance
It is important to perform regular maintenance of your EasyFold PRO 2.0 for longevity and warranty
eligibility. Even a little cleaning now and then will go a long way to keep your device looking and
functioning like new.
Certified repair shops with trained professionals who specialize in electric wheelchairs and scooters
will be qualified to perform the service and maintenance on your EasyFold PRO 2.0.
We recommend you inspect your EasyFold two or three times per year in the following areas:
(1) Frame: Tighten loose screws as necessary using the tool kit included with your EasyFold
PRO 2.0.
(2) Wheels: Make sure they rotate easily. Significant resistance may require new bearings.
(3) Armrest: Look for excessive wear or if they are loose.
Replacement parts and more major maintenance issues should be done by a professional.
◎ Batteries
(1) Use batteries that have been supplied by EasyFold; our batteries are special lithium
batteries designed specifically for use in the EasyFold PRO 2.0.
(2) Read all battery instructions before attempting to change or charge batteries.
(3) When you haven’t driven the wheelchair for a long time, please ensure the battery is
charged once every month to avoid decreasing battery life.
◎ Fasteners
Many of the screws, bolts and nuts on the PRO 2.0 are special high-strength fasteners. Replacing
these fasteners with non-approved parts may cause your Fold Power Wheelchair D10 to result in
faulty operation and may cause harm to you or other people, therefore:
A. Use fasteners that have been supplied by EasyFold.
B. Using the tools included with your EasyFold PRO 2.0, tighten any fasteners that become
loose as soon as possible.
◎ Change and Adjustments
Never use non-EasyFold PRO 2.0 parts or make changes to your PRO 2.0 unless authorized in
writing by a representative from our company. Doing so will void the warranty and may create a
safety hazard.
To Next Page
Loading...