Basic Operation
Before operating your EasyFold PRO 2.0, be sure to read all safety information and precautions
included in this manual. Operate only in the appropriate environment after you have practiced
operating the wheelchair and know how to work the controller.
Be certain that the power is OFF with no light on the controller, and make
sure the footrest is down before getting into the wheelchair.
Press the Power button, you will hear a beep and a light will indicate that
power is on.
Use the joystick style control to steer and turn left, right or go forward and
backward.
Simply remove your hand from the joystick to stop.
When stopping, it is advised that you power OFF the wheelchair to prevent
accidents. Press the power button to turn off the wheelchair.
Make sure there is no light on the controller before getting off the
wheelchair.
To Next Page
Loading...
