EN
Specifications
Compatibility
Distance
Power Supply
Charge Time
Use Time
Motor
Nintendo Switch, PC, PS3,
8-10m
Android
Embedded 600mA Battery
2.5h
2 pieces
How to Connect to PC
Connect via Xinput Mode
1. Press HOME button to switch on the controller and LEDI, LED2,
LED3 and LED4 start flashing and pairing begins.
2. Insert the receiver or USB cable into the USB port of your computer
and the game controller starts pairing with the receiver. LEDI and LED4
will remain on, meaning the connection is successful.
3. If LEDI and LED4 are not glowing solid, press MODE button for 5
seconds until LEDI and LED4 remain illuminated.
Note: After pairing, LEDI and LED4 will blink and vibration will be
switched off when batteries are running below 3.5V
02
To Next Page
Loading...
