EasySMX Arion 9110 - How to Connect to PS3; Turbo Button Setting

EN
How to Connect to PS3
1. Press HOME button once to switch on the controller and LED 1,
LED2, LED3 and LED4 start flashing and pairing begins.
2. Insert the receiver or USB cable into the USB port of your PS3, and
the game controller starts pairing with the receiver. LEDI and LED3 will
remain on, meaning the connection is successful.
3. Press HOME button to confirm
First Controller
Second Controller
Third Controller
Fourth Controller
LED 1
LED 2
LED 3
LED 4
Fifth Controller
Sixth Controller
Seventh Controller
LEDI+LED4
LED2+LED4
LED3+LED4
Turbo Button Setting
1. Press and hold any key you want to set with TURBO function, then
press TURBO Button. The TURBO LED will start flashing red, indicating
setting is done. After that, you are free to hold this button during gaming
to achieve fast strike.
2. Hold down this button again and press TURBO Button simultaneous-
ly to disable TURBO function.
05