To Next Page
D
david91Sep 12, 2025
What to do after EasyWater Toxin Shield+ TS+1000 Water Dispenser power failure?
- SSamantha TaylorSep 12, 2025
After a power failure with your EasyWater Water Dispenser, reset the time of day and check the settings.
What to do after EasyWater Toxin Shield+ TS+1000 Water Dispenser power failure?
After a power failure with your EasyWater Water Dispenser, reset the time of day and check the settings.
What to do if EasyWater Water Dispenser distributor tube is leaking?
If the distributor (riser) tube in your EasyWater Water Dispenser is leaking: * Ensure the tube isn't cracked or broken. * Ensure the O-ring where the tube connects to the head is in good condition and replace it if necessary.
Guidance on selecting the optimal location for filter installation, considering water lines and drains.
List of necessary tools, pipe types, fittings, and materials for connecting the filter system.
Procedure for setting the current time on the controller, especially after a power outage.
Instructions to trigger an additional regeneration cycle for increased capacity.
Steps to initiate an immediate regeneration cycle due to water quality issues or high usage.
General| Product Name | EasyWater Toxin Shield+ TS+1000 |
|---|---|
| Operating Temperature | 40-100°F |
| Installation | Under Sink |
| Capacity | 1000 gallons |
| Product Type | Under Sink Water Filter |
| Type | Under Sink |
| Contaminant Removal | Lead, Chlorine, Heavy Metals |
| Filter Life | 1000 gallons |
| Color | White |
| Warranty | 1 year limited warranty |