Eaton 5P 650 AU - Appendices; Technical Specifications

Page 21
620-00082-01-au (en)
ENGLISH
6. Appendices
6.1 Technical specications
Tower 5P 650 AU 5P 850 AU 5P 1150 AU 5P 1550 AU
Rack 5P 650i R 5P 850i R 5P 1150i R 5P 1550i R
Output Power
@ 230 V
650 VA
420 W
850 VA
600 W
1150 VA
770 W
1550 VA
1100 W
Output Power
@ 208 V
585 VA
378 W
765 VA
540 W
1035 VA
693 W
1395 VA
990 W
Output Power
@ 200 V
585 VA
378 W
765 VA
540 W
1035 VA
693 W
1395 VA
990 W
AC Input power
•Rated input voltage
•Input voltage range
• Input frequency
range
Single phase 200-240 V
160 to 294 V
(1)
47 to 70 Hz (50 Hz system), 56,5 to 70 Hz (60 Hz system)
(2)
Output on battery
power
•Voltage
•Frequency
200/208/220/230/240 V (-10/+6 %)
(3)
50/60 Hz ±0.1 Hz
Battery
(sealed lead acid,
maintenance free)
•Standard
Tower
1 x 12 V
9 Ah
2 x 12 V
7 Ah
2 x 12 V
9 Ah
3 x 12 V
9 Ah
Rack
2 x 6 V
9 Ah
4 x 6 V
7 Ah
4 x 6 V
9 Ah
6 x 6 V
9 Ah
Environment
• Operating
temperature range
• Storage
temperature range
• Relative humidity
•Noise level
0 to 35 °C 0 to 40 °C
-15 to +50 °C
0 to 90 % (without condensation)
< 40 dBA
(1) The high and low thresholds can be adjusted using UPS settings (up to 150-294 V).
(2) Up to 40 Hz in low -sensitivity mode (programmable using UPS settings).
(3) Adjustable to 200/208/220/230/240 V, must be set to the identical AC power source value.
When the appliance is used in EU area, use an external circuit breaker in front of line with rating 16 A,
250 V which is IEC/EN 60898-1 standard compliant;
When the appliance is used in America area, use an external circuit breaker in front of line with rating 20 A,
250 V.
This product is designed for IT power distribution system.
Filter
Transformer
"AVR"
Charger Inverter
Battery