Why does my Eaton Power Tool undesirably trip?
Your Eaton Power Tool might be undesirably tripping due to several reasons: * The Trip Coil Clapper might not be resetting properly. * There could be poor engagement or worn surfaces on the Trip Bar or Trip Latch. * The Trip Bar Reset Spring may have lost torque.
What to do if Eaton Power Tool fails to trip?
If your Eaton Power Tool fails to trip, check the following components: * Trip Bar and Trip Latch for jamming. * Pole Shaft for jamming. * Operating Rod Assembly for breakage or loose pins.
General| Brand | Eaton |
|---|---|
| Model | 72VCPW-ND32 |
| Category | Circuit breakers |
| Language | English |
Discusses preliminary comments, warranty, liability, and safety precautions for circuit breakers.
Provides general information about the purpose and design of VCP-W circuit breakers.
Details the various ratings for VCP-W vacuum circuit breaker elements.
Presents the outline and dimensional drawings for VCP-W circuit breakers.
Provides recommendations for safe installation, operation, and maintenance of VCP-W circuit breakers.
Covers factory production tests, inspection, and packaging of VCP-W circuit breaker elements.
Instructions for inspecting containers and circuit breaker elements upon receipt.
Guidelines for safely handling VCP-W circuit breaker elements, including cautions.
Recommendations for storing VCP-W circuit breaker elements, both indoors and outdoors.
Lists standard and optional tools and accessories available for VCP-W circuit breakers.
Provides weight information for VCP-W vacuum circuit breaker elements.
Covers manual operation, vacuum integrity, insulation, contact, resistance, and nameplate checks.
Procedure for performing electrical operation checks on the circuit breaker.
Details the process for inserting and removing circuit breakers from their compartments.
Information on circuit breaker and structure interfacing and safety interlocks.
Guides for checking interface interlocks and proper operation between breaker and structure.
Introduces circuit breakers and describes the interrupter assembly components and functions.
Details the operation, charging, closing, tripping, and trip-free functions of the mechanism.
Covers control schemes, timing, disconnects, trip devices, interlocks, and switches.
Covers inspection frequency, qualified personnel, detailed procedures, and specific checks.
Includes troubleshooting charts, end-of-life procedures, and failure reporting.
Provides recommendations for stocking spare parts and instructions for placing orders.
Information on the optional factory-installed or aftermarket roll-on floor wheel kit.
To Next Page