9 Technical data
9.1 About technical data
For a complete technical specification, contact your Eaton representative. Due to
continuous product improvement programs, specifications are subject to change
without notice.
9.2 Directives and standards
Table 29: Directives and standards
Safety IEC 62040-1: Uninterruptible power systems (UPS) - Part 1:
General and safety requirements for UPS
IEC 60950-1: Information technology equipment - Safety -
Part 1: General requirements (as referred through the IEC
62040-1)
EMC IEC 62040-2: Uninterruptible power systems (UPS) - Part
2: Electromagnetic compatibility (EMC) requirements / Ed.2
• Emissions: category C2
• Immunity: category C3
Performance & tests IEC 62040-3: Uninterruptible power systems (UPS) - Part 3:
Method of specifying the performance and test
requirements
Environmental IEC62040-4: Uninterruptible Power Systems (UPS) - Part 4:
Environmental Aspects - Requirements and Reporting
IEC 62430: Environmentally conscious design for electrical
and electronic products
RoHS 2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic
equipment
WEEE 2012/19/EU on waste electrical and electronic equipment
(WEEE)
ECO Design Directive 2009/125/EC establishing a framework for the setting of
eco-design requirements for energy-related products
Batteries 2006/66/EC on batteries and accumulators and waste
batteries and accumulators
Packaging 94/62/EC on packaging and packaging waste
© Eaton Corporation plc 2020. All rights reserved. Revision: 006 Document ID: P-164000493 113
(126)
Eaton 91PS/93PS UPS 8–40 kW User’s and Installation Guide
To Next Page
Loading...
