81
Layout of terminal block(TB) of the UPS:
Note:
1. UPS input TB (PE/N/N/L1/L2/L3)
2. UPS bypass input TB(L1/L2/L3)
3. UPS output TB(PE/N/N/L1/L2/L3)
4. External battery TB(PE/+/N/N/-)
Below will introduce 8 modes of wiring application for UPS input/output.
Please select one mode for your actual application with below accessories
'copper busbar (including jumper cable)'.
During the wiring process, it is only necessary to remove the 'top cover of the
terminal block' without removing 'terminal block box'.
Item Quantity(PC) Figure
Copper
busbar
1 2
2 2
Jumper
cable
NA 3
To Next Page
Loading...
