EasyManua.ls Logo

Eaton ATC-300 - Page 4

Eaton ATC-300
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For more information visit: www.eaton.com IB01602015E
Instruction Booklet
Page 4 Effective: August 2010
ATC-300 2-Position Contactor
Based Transfer Switch
Figure 4. Contactor Based ATS (100A).
Each panel is independently mounted with interconnecting wiring
terminated at the connector receptacles on the ATC-300 Control
-
ler. Door or individual panel removal is achieved without disturb-
ing critical connections by removing the connectors from the
receptacles and cutting the wire ties that secure the wires to the
door.
Mounting the enclosure is simple using top and bottom mounting
flanges with elongated (teardrop) mounting holes. These mount
-
ing holes, along with power panel positioning bolts and pre-
tapped inserts, insure proper power panel mounting after the ini
-
tial enclosure installation. Refer to Section 4 for specific mount-
ing and modification details.
Table 1. Withstand Ratings.
1.3 ATS Catalog Number Identification
Transfer switch equipment catalog numbers provide a significant
amount of relevant information that pertains to a particular piece
of equipment. The Catalog Number Identification Table (Table 2)
provides the required interpretation information. An example is
offered here to initially simplify the process.
Example: Catalog Number (circled numbers correspond to position
headings in Table 2).
The catalog number ATC3C2X20400WRU describes an ATS with
a 2 pole, 2 position Power Contactor mounted on a baseplate
within the enclosure. The intelligence represented by the logic
panel is ATC-300 controller. The continuous current rating of
this equipment is 400A and applicable at 240 Vac, 60 Hz. The
transfer switch equipment is enclosed in a NEMA 3R enclosure
and is listed for UL applications.
UL 1008 WITHSTAND AND CLOSE-ON RATINGS (kA)
UL 1008 Ampere Rating 480 Volts 600 Volts
Any
Breaker
Specific
Breaker
Any
Breaker
Specific
Breaker
100 10,000 30,000 10,000 22,000
200 10,000 30,000 22,000 35,000
260 30,000 50,000
320 30,000 50,000
400 30,000 50,000
AT C 3 C2 X 2 0400 W R U
1to2 3 4 5 6 7 8 9to
12 13 14 15
to

Other manuals for Eaton ATC-300

Related product manuals