Eaton ATC-300 - Page 21

IB140042EN For more information visit: www.eaton.com
Instructional Booklet
Effective: May 2015 Page 21
ATC-300/900 Breaker Based Transfer Switch
Figure 19A. 4 Pole Neutral Bond for Service Entrance
Step 1: Disconnect the power panel from the rest of the transfer
switch by unplugging the connector plugs P1, P2, and P3
(Figures 20 and 21).
NEUTRAL
ASSEMBLY
GROUND
CONNECTION
NEUTRAL BOND
(FOR SERVICE
ENTRANCE)
NEUTRAL TO
NEUTRAL
ASSEMBLY
JUMPER