Eaton Bussmann Series Installation Manual

Installation manual 3A3718 Rev E
Effective February 2019
Supersedes January 2019
CCP2-H4X-_ pistol handles for use with
12 mm shafts
These instructions cover the installation
procedures specific to the catalog numbers shown
above. Please review the switch and switch
handle applications table on page 2 to ensure the
handle in this kit can be installed on your specific
Compact Circuit Protector switch application.
Short, clockwise pistol handle:
• CCP2-H4X-B3
• CCP2-H4X-R3
Short, counterclockwise pistol handle:
• CCP2-H4X-B3L
• CCP2-H4X-R3L
Long, counterclockwise pistol handle:
• CCP2-H4X-B4L
• CCP2-H4X-R4L
Long, clockwise pistol handle:
• CCP2-H4X-B4
• CCP2-H4X-R4
For complete installation, customers must supply
one each of the following.
•
A rotary operating mechanism (catalog
numbers):
• CCP2-RM2 front rotary, 200 A switches
• CCP2-RM4 front rotary, 400 A switches
• CCP2-SM right or left side rotary, 200
and 400 A switches
•
A 12 mm square shaft (catalog numbers):
• CCP2-SH2-225 (8.9”/225 mm long)
• CCP2-SH2-425 (16.7”/425 mm long)

Eaton Bussmann Series Specifications

General

Series	Bussmann series
Voltage Rating	Up to 600V AC/DC
Current Rating	Up to 600A
Interrupting Rating	Up to 200kA
Type	Disconnect Switch
Enclosure Type	NEMA 1, 3R
Standards	UL Listed, CSA Certified