Eaton Cutler-Hammer MP-3000 - Page 32

Page 32 I.L. 17562
PR 0.3 Effective 8/99
Line
No.
Display Help Message Setpoint
Range/ Value
Selection
Value as
shipped
Selected Value
3 Choose:
I2T A ON
I2T T ON
Or
I2T OFF
ENABLE I2T ALARM OR TRIP
TO ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between
I2T A ON, I2T T
ON, and
I2T OFF
I2T OFF
4 Choose:
JAM A ON
JAM T ON
Or
JAM OFF
ENABLE JAM ALARM OR
TRIP TO ACTIVATE AUX2
RELAY OUTPUT OR DISABLE
Toggles between
JAM A ON, JAM
T ON, and JAM
OFF
JAM OFF
5 Choose:
UL A ON
UL T ON
Or
UL OFF
ENABLE UNDERLOAD ALARM
OR TRIP TO ACTIVATE AUX2
RELAY OUTPUT OR DISABLE
Toggles between
UL A ON, UL T
ON, and UL OFF
UL OFF
6 Choose:
UB A ON
UB T ON
Or
UB OFF
ENABLE PHASE UNBALANCE
ALARM OR TRIP TO
ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between
UB A ON, UB T
ON, and UB OFF
UB OFF
7 Choose:
WD A ON
WD T ON
Or
WD OFF
ENABLE WINDING TEMP
ALARM OR TRIP TO
ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between
WD A ON, WD
T ON, and WD
OFF
WD OFF
8 Choose:
MB A ON
MB T ON
Or
MB OFF
ENABLE MOTOR BEARING
TEMP ALARM OR TRIP TO
ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between
MB A ON, MB T
ON, and
MB OFF
MB OFF
9 Choose:
LB A ON
LB T ON
Or
LB OFF
ENABLE LOAD BEARING
TEMP ALARM OR TRIP TO
ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between
LB A ON, LB T
ON, and LB OFF
LB OFF
10 Choose:
AX A ON
AX T ON
Or
AX OFF
ENABLE AUXILIARY RTD
TEMP ALARM OR TRIP TO
ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between
AX A ON, AX T
ON, and AX OFF
AX OFF
11 Choose:
SX A ON
SX T ON
Or
SX OFF
ENABLE STARTS PER TIME
TRIP OR ALARM TO
ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between
SX A ON, SX T
ON, and SX OFF
SX OFF
12 Choose:
TBS T ON
Or
TBS OFF
ENABLE TIME BETWEEN
STARTS TRIP OR TO
ACTIVATE AUX2 RELAY
OUTPUT OR DISABLE
Toggles between
TBS T ON, and
TBS OFF
TBS OFF
13 RTDF
ON
Or
RTDF OFF
ENABLE RTD FAILURE
DIAGNOSTIC TO ACTIVATE
AUX2 RELAY OUTPUT OR
DISABLE
Toggles between
RTDF ON and
RTDF OFF
RTDF OFF
14 RTDF
ON
Or
RTDF OFF
ENABLE RTD FAILURE
DIAGNOSTIC TO ACTIVATE
AUX2 RELAY OUTPUT OR
DISABLE
Toggles between
RTDF ON and
RTDF OFF
RTDF OFF