To Next PageTo Next Page
Need help?Do you have a question about the Eaton MPCV Series and is the answer not in the manual?
General| Series | MPCV |
|---|---|
| Poles | 3 |
| Voltage | 690V AC |
| Voltage Rating | Up to 690 VAC |
| Standards | IEC/EN 60947-4-1, UL 508, CSA C22.2 No. 14 |
| Mounting | DIN Rail |
| Frequency | 50/60 Hz |
| Short Circuit Current Rating | 100kA |
| Trip Class | 10 |
| Protection Features | Overload, Short Circuit, Phase Loss |
| Communication | Optional communication modules |
Describes the MPCV relay's purpose, basic functions, and operational capabilities.
Explains the voltage and current conditions for tripping and closing the network protector.
Details the relay's data buffers for logging trip events and waveforms.
Guides pendant use for navigation, settings adjustment, and system configuration.
Step-by-step guide for installing and calibrating the MPCV-D relay.
Outlines installation for MPCV-22 and MPCV-GE relays, including terminal configurations.
Provides detailed installation notes for GE models, covering Watt-Var and Time Delay functions.
Details electrical, mechanical, environmental specifications, and compliance standards.
Explains operational modes, settings, tolerances, and testing procedures.
Covers laptop communication, IMPACC system, protocols, translators, and system protection.
Details wiring topologies and rules for installing IMPACC systems.
Covers relay status, replacement, conversion guidelines, and troubleshooting.
Illustrates closing and trip curve characteristics for relay settings.
Provides legal disclaimers, publication info, and contact details.
