Need help?Do you have a question about the Eaton MP-3000 and is the answer not in the manual?
General overview of the MP-3000 motor protection relay and its purpose.
Details new features and improvements in the MP-3000 relay compared to older models.
Explanation of the manual's structure and how to navigate its sections.
Overview of the MP-3000 relay's physical characteristics, mounting, and capabilities.
Describes the MP-3000's design for maximizing motor utilization and protection.
Details the relay's logic for controlling motor starts and operational sequences.
Specifications for the relay's control power requirements and operating range.
Specifications for the relay's current input ratings, CT ratios, and accuracy.
Specifications for the relay's programmable discrete input capabilities and ratings.
Description of the MP-3000's faceplate, display, indicators, and pushbuttons.
Explanation of the basic motor state display and system status messages.
How to view real-time motor data and parameters using the Monitor mode.
Overview of how to use the Program mode to change MP-3000 settings.
Settings related to motor constants, including FLA and locked-rotor current.
Configuration settings for various trip functions like ground fault and overcurrent.
Procedures for physically mounting the MP-3000 relay and its optional modules.
General guidelines and precautions for wiring the MP-3000 and associated components.
Specifics on connecting current transformers for accurate measurements and protection.
General procedure for applying AC power to the MP-3000 for the first time.
Pre-startup checks to ensure safe and correct installation before applying power.
Verifying AC power input and initial electrical connections before operation.
How the MP-3000 hardware and software work together for motor protection.
How the MP-3000 receives and processes motor current and RTD data for monitoring.
Overview of the various protective functions offered by the MP-3000 for motors.
Guidance for applying settings in conjunction with Section 5.
How the MP-3000 protects motors from electrical and thermal issues.
How the I2t algorithm calculates motor temperature without RTD data.
Viewing and changing MP-3000 data and settings via a host computer.
Information on selecting the appropriate Product Operated Network Interface module.
Procedures for connecting the PONI module to networks and host systems.
General procedures for testing MP-3000 inputs and outputs.
How to test relay outputs while the motor is running.
Step-by-step guide to testing the trip output relay's functionality.
Overview of troubleshooting procedures for the MP-3000 and monitored equipment.
How to interpret MP-3000 Operator Panel displays and system status messages.
Diagnosing problems with equipment monitored by the MP-3000 using alarm/trip data.
Introduction to the Drawout Case option for the MP-3000 relay.
Description of the MP-3000 Drawout Case assembly and its components.
Procedures for wiring and setting up the MP-3000 in its drawout case.
To Next Page
General