How to troubleshoot Eaton DX RT 6K UPS fault code A107?
If your Eaton UPS displays fault code A107, it could be due to: * Input L, N line reversed: Check the input connection. * The chassis is not grounded.
What to do if Eaton DX RT 6K parallel cable disconnect?
If the Eaton UPS indicates a parallel cable disconnect, check if the parallel cable is connected correctly.
General| Power Rating | 6 kVA |
|---|---|
| Topology | Double Conversion Online |
| Output Voltage | 200/208/220/230/240 VAC |
| Output Frequency | 50/60 Hz |
| Form Factor | Tower |
| Output Power | 6000 W |
| Input Voltage | 200/208/220/230/240 VAC |
| Input Frequency | 50/60 Hz |
| Battery Type | Sealed Lead Acid (SLA) |
| Runtime at Half Load | Varies by battery configuration |
| Typical Recharge Time | 4 hours to 90% |
| Communication Ports | USB, RS-232 |
| Network Management | Optional Network Management Card |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Output Voltage THD | < 5% |
Explains how UPS protects sensitive equipment from power problems and lists UPS benefits.
Provides procedures for installing the UPS and EBM units in a rack.
Specifies required protective devices and circuit breaker ratings for UPS input.
Details recommended cable sizes for earthing, input, and output connections.
Step-by-step guide for connecting AC power to the UPS terminal blocks.
Explains how to connect multiple UPS units in parallel for increased capacity or redundancy.
Provides procedures for starting and shutting down the UPS with or without utility power.
Detailed safety precautions and procedures for replacing UPS batteries.
Provides a chart to identify common UPS alarms, fault codes, causes, and actions.
To Next Page