Eaton EASY-E4-UC-12RC1 User Manual

Manual
11/18 MN050009 EN
easyE4 Manual

Eaton EASY-E4-UC-12RC1 Specifications

General

Brand	Eaton
Model	EASY-E4-UC-12RC1
Category	Relays
Language	English

Summary

Before starting with the installation

1. easyE4 control relays description

1.1 Use as intended

Defines the intended use and approved applications for the easyE4 device.

1.2 Function

2. Installation

2.1 Prerequisites for the location of use

2.3 Mounting

Details on how to mount the easyE4 control relays, including rail and screw mounting.

2.4 Connection terminals

Information on connecting cables, including cross-sections and terminal capacities.

2.6 Programming software license

3. Commissioning

3.1 Initial commissioning

Steps for the initial setup and configuration of the easyE4 device.

3.3 Switch on

Describes the startup behavior of easyE4 control relays with LED indicators and displays.

4. Operation

4.1 Base device with display and buttons

Details on operating the base device using its display and keypad.

4.2 Operating modes of the easyE4

4.3 Operation of the menu selection and value entry

4.5 Your first EDP program

Step-by-step guide to creating a first program using the easy Device Programming language.

4.6 Transfer program to the easyE4 device

Instructions on transferring programs using microSD cards or Ethernet connections.

5. Programming on the device

5.1 Program

5.2 Circuit diagram display

5.4 Working with contacts and coils

Instructions on wiring contacts and coils in the easyE4 circuit diagram.

5.5 Transferring programs from and to a memory card

Covers the process of transferring programs to and from a microSD memory card.

5.6 Working with function blocks

Details on using, configuring, and managing function blocks within easyE4.

6. Function blocks

6.1 Manufacturer function blocks

Overview of pre-defined function blocks provided by Eaton, categorized by type.

6.2 Interrupt function blocks

Explains counter-controlled, edge-controlled, and time-controlled interrupt function blocks.

6.3 UF - User function block

Covers the creation, configuration, and management of custom user function blocks.

7. System settings

7.1 System options - Base device with display and buttons

Configurable system settings for easyE4 base devices with display and buttons.

7.5 NET

7.8 Setting the startup behavior

7.13 Retention function

7.14 Security – password protection

Setting up passwords to protect device areas and the project.

7.15 Configuring the memory card and device ID

7.16 Time and Date setting

9. easyE4 inside

9.1 Program execution

Explains how programs are executed using LD, FBD, ST, and EDP programming languages.

9.2 Transfering an existing circuit diagram

9.4 Time behavior of the inputs and outputs

9.7 NET network

10. Diagnostics messages of the operating system

10.1 Transistor outputs (overload / short circuit)

Details how to detect and handle overloads or short circuits on transistor outputs.

11. Connection to other devices

11.1 Functions offline

11.2 Establishing an Ethernet connection

Prerequisites and steps for establishing an Ethernet connection to the easyE4 device.

11.3 Setting up a NET

11.4 Modbus TCP

Explains Modbus TCP protocol and its implementation on easyE4 for communication.

11.5 Setting up a web server

11.6 E-mail function

12. Faults

12.1 Messages from the operating system

12.2 Possible situations when creating programs

Troubleshooting guide for common issues encountered during program creation.

12.4 Functionality of the NET faulty