What to do if my Eaton Ellipse ECO 650 UPS operates on battery power when AC power is available?
The circuit breaker 13, located under the UPS, may have been tripped by an overload on the UPS output. Try resetting the circuit breaker.
What does it mean if the red LED 11 is on and the audio alarm beeps every 30 seconds on my Eaton Ellipse ECO 650?
If the red LED 11 is on and the audio alarm beeps every 30 seconds on your Eaton UPS, it indicates a fault has occurred on the UPS and the battery backup outlets 9 are no longer supplied. Call after-sales support.
What does it mean if the red LED 11 is flashing on my Eaton Ellipse ECO 650 UPS?
If the red LED 11 is flashing on your Eaton UPS, it means that the battery has reached the end of its service life. You should have the battery replaced.
What to do if green button 12 flashes and the audio alarm beeps continuously on my Eaton Ellipse ECO 650 UPS?
If the green button 12 is flashing and the audio alarm is beeping continuously on your Eaton UPS, it indicates that the battery backup outlets 9 are overloaded. Disconnect some of the equipment connected to the battery backup outlets 9.
Why is the green button 12 flashing frequently and the audio alarm beeping on my Eaton Ellipse ECO 650?
The green button 12 might be flashing frequently, and the audio alarm beeping because the Eaton UPS is frequently operating on battery power due to a poor-quality AC power source. To resolve this, have the electrical installation checked by a professional or try using another wall outlet.
Why is my Eaton UPS beeping and the green button 12 flashing frequently?
The AC power source may be of poor quality. Consult the power supply specifications.
What does it mean when the red LED 11 flashes on my Eaton UPS?
The battery has likely reached the end of its service life and needs to be replaced.
General| Power Rating | 650 VA |
|---|---|
| Output Voltage | 230V |
| USB Port | Yes |
| Surge Protection | Yes |
| Waveform Type | Stepped approximation to a sinewave |
| Output Power Capacity | 400 W |
| Battery Type | Sealed lead-acid |
| Number of Outlets | 4 |
| Topology | Line-interactive |
| Communication | USB port |
| Efficiency | Typical 95% |
| Frequency Range | 50/60 Hz |
| Typical Recharge Time | 4-6 hours |
| Operating Temperature | 0 to +40°C |
| Relative Humidity | 0-95% non-condensing |
| Standards | IEC 62040-3 |
| Safety Approvals | CE |
| Outlets | 4 IEC outlets |
Shows connection for FR/DIN UPS models to AC power.
Illustrates connecting UPS models and EcoControl feature.
Details network and modem surge protection connection via UPS.
Demonstrates connecting UPS to a computer via USB.
Explains how to turn the UPS on and off using the button.
Provides the website to register the product warranty online.
Provides safety precautions for battery disposal and handling.
Details the steps for safely replacing the UPS battery.
Describes the intended use and limitations of the UPS product.
Explains how EcoControl outlets manage peripheral power consumption.
Details how to adjust EcoControl detection threshold for optimal performance.
Guides on connecting the UPS to power and peripherals.
Details operation of Master and EcoControl outlets, LEDs, and buttons.
Lists common UPS problems, their diagnostics, and solutions.
Configuring UPS sensitivity to AC power variations.
Customizing the audio alarm behavior during battery operation.
To Next Page
